Size and trim and then wet tumble or tumble first?
Size and trim and then wet tumble or tumble first?
Since it's new brass, either way would work just fine.Originally Posted by crazynewts
Sent from my SM-J727V using Tapatalk
Where it is new brass and not once fired does it even need to be sized and trimmed?
Sent from my SM-N960U using Tapatalk
Just don't tell my wife how much any of this really costs.
It doesn’t hurt to run new brass through a sizing die, that way you’re sure its in spec. I have seen some new brass that is deformed in one way or another. Trimming may not be necessary but the length should be checked just in case. It is not fun when you have a jam during that trophy hunt or timed competition.
Big Eddy
Not big and tall but big and round
I ran the 1,000 I had through an extra tumbling in corncob media and then checked every one of them in a L.E. Wilson case gauge.
None needed sizing or trimming!
So, they're primed and awaiting powder and projectiles.
Sent from my SM-T387V using Tapatalk
Posting Permissions
Reply With Quote